Windows Screen - evertz HD9155 Series Instruction Manual

Model HD9155 Production Afterburner Manual
Click on the "Synchronize lines" check box to move all the VITC lines together. In this mode
you select the line number for the VITC 1
(and their duplicates) will stay the same distance away. When the Synchronize lines feature is
off you can freely enter line numbers for each line.

4.1.4.3. Windows Screen

The Windows screen is used to control the Production Afterburner's character inserter. There is also a
global Character generator on/off command available on the Options menu. It must be set to On in order
to see any of the character generator windows.
The Video Timecode window displays the VITC time information.
The Video User Bits window displays the VITC user bit information.
The Text window allows the user to enter up to 32 characters of text to be displayed.
The Pulldown window displays a letter showing the pulldown of the video picture when the input video is
1080p/24sF
The Debug window can display additional debugging information on the output video. Normally this
window is turned off and should only be used under direction of an Evertz Factory technician. Changing
the horizontal position value for the Debug window controls the information displayed. (The window can
not be moved horizontally). See section 6.4 for more information about the Debug Window displays.
Style: Choose the format for the Character Burn-in Windows displayed on the Video Monitor.
Font Size: Choose from one of 2 vertical character sizes for the character display windows.
Virtual Slate: The virtual slate allows you to configure various character display windows to be on for a
specified length of time at the beginning of each shot.
Page 4-6
st
line and the line numbers for the remaining lines
Revision 1.3
USING CONFIGWARE