Operation And Wash Cycles - Haier HWT60AA User Manual

Operation and Wash Cycles

1
Press the
2
Press the
After the power is turned on, the default is Cotton cycle. To select other fully-auto cycles,
press the "Cycle" button until the corresponding indicator is illuminated.
For example, when you want to wash lightly soiled clothes quickly, use a Express cycle.
3
Press the
All of the cycles except Drum clean , Rinse & spin and spin cycles have fuzzy function
and the water level can be adjusted according to the texture and quantity of clothing.
After the detection is completed, the water level is set automatically.
When the washing machine is working, the water level cannot be changed. It is necess-
ary to press the "Start/Pause" button before pressing the water level.
Press the button to reset the water level and press the Start/Stop button to start running.
4
Press the
Set the wash temperature in accordance to the requirements of each load.
5
Press the
When the power is turned on, the washing machine Delay procedure is automatically set to
non-startup state.
The laundry process will begin immediately after pressing the Start/Pause button.
Operating Method of Delay Procedure
Before setting the required delay time, first set up the program and other options, and then
press the Delay button.
The program LED
During the Delay process, press the "Delay" button, and display the
appointment time at the end of the cycle.
First selectable delay is + 2hours. Increasing in 1 hour
increments - Maximum selectable is +12hours.
Reservation time is the end of the cycle.
button to switch power on/off
button to select automatic cycles
button to change the water level
button to change the water temp
Temp
button to select delay wash
will be turned off and the reservation indicator will be turned on.
The wash will finish
in about 10 hours
12