Table of Contents
Advertisement
Operation
Loading the appliance
Adding Detergent
Detergent(
liquid/
washing powder)
compartment
Softener
compartment
How to use liquid detergent
Pour liquid detergent into the detergent
compartment as illustrated in the figure
above.
How to use softener
Pour softener into the softener
compartment as illustrated in the figure
above. Softener will be adding into the
washing machine during the rinse cycle.
Flush the detergent drawer with water
before the next wash cycle to avoid
residue and optimize the washing
performance.
The washing capacity refers to the maximum dry weight of
laundry that could be loaded into the appliance.
The thickness, size and type of fabrics will influence the
actual capacity.
For laundries less than 2.0kg, kindly select the water level
at Low.
It is recommended to use low suds/ high efficiency washing
powder which is designed for automatic washing machine.
10
How to use washing powder
It is suggested to add washing powder
into the drawer.
Dissolve directly inside the washing
machine:(not applicable for reserve
program)
1.Add some water (select
2.Add washing powder.Run for about 30s to fully
dissolve the Powder.Then push the
button.
3.Put in laundries.Select suitable water level.Push
the "Start/Pause" button again.
Quick dissolving washing powder:
1.Prepare a container and pour in water at 30°C
and add washing powder.
2. Stir the mixture until the washing powder
dissolve completely into the water.
Apply an appropriate amount of
washing powder in accordance to the
laundry volume and select the right
water level.
If you select "Quick " Wash program, it
is suggested to use liquid detergent
instead of washing powder to optimize
the washing performance.
It is not recommended to use rich-foam
washing powder.
Flush the detergent drawer with water
before the next wash cycle to avoid residue
and optimize the washing performance.
"
"
Low
water level).
"Start/Pause"
Advertisement
Table of Contents
