Audio Dubbing - Canon optura50 Instruction Manual

Audio Dubbing

You can add sound from audio devices (AUDIO IN) or with the built-in or an external
microphone (MIC. IN).
This function is operated with the wireless controller.
Connecting
Connecting an Audio Device
Refer also to the instruction manual of the connected device.
Audio device
(e.g. CD player)
L
AUDIO
R
Connecting a Microphone
See Recording with an External Microphone (
Dubbing
CAMERA
MENU
AUDIO SETUP
( 71)
1. Set the camcorder to PLAY (VCR) mode and load a recorded cassette.
Use a tape recorded in SP, 12-bit mode with this camcorder.
2. Press the MENU button and select [AUDIO SETUP]. Select [AUDIO
DUB.], set it to [AUDIO IN] or [MIC. IN] and press the MENU button.
3. Locate the scene you wish to start audio dubbing.
4. Press the PAUSE
5. Press the AUDIO DUB. button on the wireless controller.
"AUDIO DUB." and "
6. Press the PAUSE
dubbing.
• Audio device: Begin playback.
• Microphone: Speak into the microphone.
7. Press the STOP
Audio device: Stop playback.
114
Signal flow
STV-250N Stereo Video Cable
(supplied)
PLAY (VCR)
button on the wireless controller.
" appear.
button on the wireless controller to begin
button on the wireless controller to stop dubbing.
56).
CARD CAMERA
AUDIO DUB.•••AUDIO IN
CARD PLAY