Playing Back On A Tv Screen - Canon optura50 Instruction Manual

Playing Back on a TV Screen

The AV terminal also serves as headphones terminal. When "
screen, change the setting following the procedure below.
CAMERA
MENU
VCR SETUP
( 71)
Press the MENU button and select [VCR SETUP]. Select [AV/PHONES
set it to [AV] and press the MENU button.
TVs with Audio/Video Terminals
Refer also to the TV or VCR instruction manual.
1. Turn off all devices before starting the connections.
2. Connect the STV-250N Stereo Video Cable to the camcorder's AV
terminal and the audio/video terminals on the TV/VCR.
Connect the white plug to the white audio terminal L (left), the red plug to the red audio
terminal R (right) and the yellow plug to the yellow video terminal VIDEO.
3. If connecting to a TV, set the input selector to VIDEO. If connecting to
a VCR, set the input selector to LINE.
PLAY (VCR)
Signal flow
Signal flow
STV-250N Stereo Video Cable
STV-250N Stereo Video Cable
(supplied)
(supplied)
" is displayed on the
CARD CAMERA
AV/PHONES ••AV
E
CARD PLAY
],
VIDEO
AUDIO
L
R
43