Stanley Crimp Software - Stanley PBD1200 User Manual

INTELED SYSTEM
The InteLED light ring shows you the status of the crimp in real-time.
White - The tool is crimping. InteLED will stay lit for 30 seconds after the crimp is complete.
Green - The tool has developed full hydraulic pressure during the crimp. The crimp is good.
Red - The tool did not develop full pressure during the crimp. Crimp again.
CHECKING BATTERY CHARGE

STANLEY CRIMP SOFTWARE

STANLEY Crimp software provides valuable data about
each crimp. It is also required to update the tool firmware.
INSTALLATION
1. Download the STANLEY Crimp software from the
STANLEY Infrastructure website.
www.stanleyinfrastructure.com/products/cordless-td
Note: STANLEY Crimp software requires a minimum
of Windows XP SP3 running with administrator
rights.
2. Follow the prompts on screen to complete
installation.
3. Connect PBD1201 to a PC using a micro USB cable.
Note: InteLED will shine blue when connected.
FIRST RUN
1. Run the software using the STANLEY Crimp
software icon on your Windows desktop.
2. You will be prompted to register your software. Left
click the "User Registration" button.
3. Fill out the registration form and click "Register".
OPERATION
Battery Charge Button
75 - 100% Charged
51 - 74% Charged
Less than 50% Charged
Charge Battery
USB Connection
PBD1201 User Manual ◄ 9