Usb Configuration - LG 55EW960H Commercial Mode Setup Manual

EZ-Manager Wizard (Cont.)
(Continued from previous page)
If you opt to initiate a real-time download in the last step, the EZ-Manager Wizard will proceed with
the Pro:Centric application and/or E-Z Installation data downloads (see Processing the Pro:Centric
Configuration screen example on page 21). When the Pro:Centric configuration is complete, an
EZ-Manager Configuration Complete screen (see example on page 21) is displayed, and after
10 seconds, the wizard exits, and the TV turns OFF.
Note: With the EZ-Manager Configuration Complete screen on display, you can also manually
turn off or reboot the TV. If desired, select TURN OFF or REBOOT, respectively, and then press the
Wheel (OK) button on the Installer Remote.

USB Configuration

TV Manager / USB download options enable you to download configuration or software files
individually from a USB memory device to the TV. You can also use the Ez Download utility available
from the menu to select one of each type of file to be downloaded at one time using one process.
Each of the USB download functions requires that you have the appropriate file(s) loaded on a USB
memory device. If you wish to perform a software update, the software update file must be stored in
a folder named "LG_DTV" in the root directory of the USB memory device. Clone/Configuration (.tlx)
files should simply be stored in the root directory of the USB device.
The procedure below assumes the desired file(s) is/are already loaded onto the USB device. For
further information on the TV Manager / USB download options and file requirements, and/or for
information on creating Clone/Configuration (.tlx) files, refer to the appropriate section(s) in this
document.
Before You Begin
• If you intend to use the Zoning feature(s) on this TV, make sure to assign the appropriate TV
Zone # and/or Wi-Fi Zone # in the EZ-Manager's Zones, Label, and Room Number screen
BEFORE continuing with USB Configuration. See "TV Configuration Options" on page 18 for
further information.
• Ensure the USB device to be used has been formatted with FAT format.
• When creating files to be downloaded, avoid using special characters (?, &, @, etc.) in filenames.
• Refer to "Ez Download Utility" on pages 26 to 29 for further information on the Ez Download utility.
• Refer to "Custom Master TV Setup" on pages 41 to 43 for information on creating a Clone (.tlx)
file, and/or refer to "Creating an FTG Configuration File" on pages 50 to 51 for information on
creating an FTG Configuration (.tlx) file for FTG Mode configuration.
• See Reference section, "Updating TV/PTC Software using a USB Memory Device," for further
information on software updates.
USB Configuration via EZ-Manager Wizard
With either the TV Configuration Options or the Zones, Label, and Room Number screen on display,
proceed as follows to configure the TV using the USB memory device.
1. Insert the USB memory device with the appropriate file(s) into either of the TV's USB ports.
24
(Continued on next page)
206-4307