LG 55EW960H Commercial Mode Setup Manual page 22

EZ-Manager Wizard (Cont.)
Manual Pro:Centric Configuration
1. With the Searching for Pro:Centric Server screen on display, use the Left/Right arrow keys on
the Installer Remote to select MANUAL PRO:CENTRIC at the bottom of the screen, and then
press the Wheel (OK) button.
In the Pro:Centric Manual Configuration screen (see examples below), you will be able to
configure the appropriate Pro:Centric settings in the TV. Use the Up/Down arrow keys on the
Installer Remote to navigate between fields.
PRO:CENTRIC MANUAL CONFIGURATION
<
Pro:Centric Mode
<
Media Type
<
Data Channel
Signal Strength
Signal Quality
data channel not found
BACK SEARCH
PRO:CENTRIC MANUAL CONFIGURATION
<
Pro:Centric Mode
<
Media Type
<
Server Address
IP Address
0
IP Port
IP server not found
BACK SEARCH
2. In the Pro:Centric Mode field, use the Left/Right arrow keys to select the appropriate Pro:Centric
Application Mode—FLASH, GEM, HTML, or CONFIGURATION ONLY.
Note: For remote management only, select CONFIGURATION ONLY. The TV will search for
TV E-Z Installation data downloads; however, Pro:Centric application data will not be downloaded,
i.e., Installer Menu item 098 PRO:CENTRIC will be set to 0.
3. Refer to the appropriate subsection below, depending on the Pro:Centric server configuration, to
complete the remaining fields.
22
>
CONFIGURATION ONLY
>
RF
>
1
0%
0%
>
CONFIGURATION ONLY
>
IP
>
IP Address
0 0 0
0
X
Pro:Centric Manual Configuration Screen
with RF Media Fields
Note: By default, the Pro:Centric Manual
Configuration screen initially shows RF
configuration fields.
03
X
Pro:Centric Manual Configuration Screen
with IP Media Fields
03
(Continued on next page)
206-4307