Usb Configuration - LG 43UV570H Setup Manual

EZ-Manager Wizard (Cont.)
(Continued from previous page)
If you opt to initiate a real-time download in the last step, the EZ-Manager Wizard will proceed with
the Pro:Centric application and/or E-Z Installation data downloads (see Processing the Pro:Centric
Configuration screen example on page 21). When the Pro:Centric configuration is complete, an
EZ-Manager Configuration Complete screen (see example on page 21) is displayed, and after 10
seconds, the wizard exits, and the TV turns OFF.
Note: With the EZ-Manager Configuration Complete screen on display, you can also manually turn
off or reboot the TV. If desired, select TURN OFF or REBOOT, respectively, and then press OK on
the Installer Remote.

USB Configuration

TV Manager / USB download options enable you to download configuration or software files
individually from a USB memory device to the TV. You can also use the Ez Download utility
available from the menu to select muliple types of files to be downloaded at one time using one
process.
Each of the USB download functions requires that you have the appropriate file(s) loaded on a USB
memory device. If you wish to perform a software update or download splash screen/background
image files, the software update/image file(s) must be stored in a folder named "LG_DTV" in the
root directory of the USB memory device. Clone/Configuration (.tlx) files should simply be stored
in the root directory of the USB device.
The procedure below assumes that the desired file(s) is/are already loaded onto the USB device.
For further information on TV Manager / USB download options and file requirements, and/or for
information on creating Clone/Configuration (.tlx) files, refer to the appropriate section(s) in this
document.
Before You Begin
• If you intend to use the Zoning feature on this TV, make sure to set the appropriate TV Zone #
in the EZ-Manager's Zone, Label, and Room Number screen BEFORE continuing with USB
Configuration. See "TV Configuration Options" on page 18 for further information.
• Ensure the USB device to be used has been formatted with FAT format.
• When creating files to be downloaded, avoid using special characters (?, &, @, etc.) in filenames.
• Refer to "Ez Download Utility" on pages 26 to 29 for further information on the Ez Download utility.
• Refer to "Custom Master TV Setup" on pages 41 to 43 for information on creating a Clone (.tlx)
file, and/or refer to "Creating an FTG Configuration File" on pages 50 to 53 for information on
creating an FTG Configuration (.tlx) file for FTG Mode via CPU configuration.
• See Reference section, "Downloading a Splash Screen Image using a USB Memory Device," for
splash screen image guidelines.
• See Reference section, "Downloading Background Images using a USB Memory Device," for
background image guidelines.
• See Reference section, "Updating TV/PTC Software using a USB Memory Device," for further
information on software updates.
24
206-4325