Toshiba BU1207MG Manual page 20

Model Name
Optical part
Imager
Number of effective pixels
Scanning area (H) x (V) [mm]
Pixel size x
(H)
Color filter
Scan method
Electronic shutter method
Aspect ratio
Sensitivity
Minimum illuminance
Gain
Setting range
AGC effective area
Black Level
Gamma
Hue
Saturation
White balance
Effective range
MWB setting format
OPWB effective area
LUT
Sharpness
Image Buffer
User Setting Memory
User Free Memory
Test Pattern
Power supply
Power consumption(*1)
(*1) at the all pixel readout
Copyright © 2018 TOSHIBA TELI CORPORATION, All Rights Reserved.
(H) x (V)
(V) [μm]
BU1207MCG
Optical glass
CMOS image sensor
4096 x 3000
14.19 x 10.34 (1.1 type)
3.45 x 3.45
RGB primary color mosaic-on-tip color filter
Progressive
Global shutter
Approx. 4:3
1150lx, F5.6, 1/31s
3lx (Gain +24dB, Video Level 50%)
MANUAL、AGC (factory setting：MANUAL)
0 to +24dB (factory setting : 0dB)
Set in arbitrary percentage. (factory setting : 100% (full
-25 to 25% (factory setting : 0% [ 0LSB@8bit ])
screen))
γ=1.0 to 0.45 (factory setting : γ=1.0)
-180° to 180° (factory setting : 0°)
x0 to x2 (factory setting : x1.3)
MWB, OPWB (factory setting : MWB)
2,500～6,500K
R/B gain independent setting
Full pixel
Input 12 bit, Output 12 bit
0(OFF)～7 ( factory setting : OFF)
256M Byte
15 channels
Black, White, Grey A, Grey B
Horizontal ramp waveform, Vertical ramp waveform,
Color bars(factory setting : OFF)
DC +5V5% (from USB connector)
(factory setting : OFF)
3.1W (maximum)
Horizontal ramp waveform, Vertical ramp waveform,
Color bars (factory setting : OFF)
19
BU1207MCF
IR cut filter
1425lx, F5.6, 1/31s
64 Byte
http://www.toshiba-teli.co.jp/en/
D4278997A