Toshiba BU1207MG Manual page 23

6.5 GPIO Input / Output signal specification
I/O Connector Pin No.
GPIO signal
Input / Output circuit
Input signal specification
Input level
Polarity
Pulse width
Input impedance
Output signal specification
Output signal
Output level
Maximum Current
Polarity
Timer0 Active
Delay
Duration
TimerTriggerSource
Note on Input Level:
- Line0 and Line2 have a different input level. Please use input level within the voltage described in this
specification.
Copyright © 2018 TOSHIBA TELI CORPORATION, All Rights Reserved.
Input / Output (factory setting : Input)
IOLineModeAll
Low: 0 to 0.5V, High: 4.0 to 5.0V
High active / Low active (factory setting : Low active)
TIMER0 ACTIVE, USER OUTPUT, EXPOSURE ACTIVE,
FRAME ACTIVE, FRAME TRANSFER, FRAME TRIGGER WAIT
High active / Low active (factory setting : Low active)
0 to 2000000μs (factory setting : 0μs)
0 to 2000000μs (factory setting : 0μs)
Line0Active, ExposureStart, FrameTrigger
22
1 Pin : Line2
Inside
DC5.0V
10kΩ
1
50μs (minimum)
High impedance
5V CMOS
+/-32mA
http://www.toshiba-teli.co.jp/en/
3
D4278997A