Toshiba BU1207MG Manual page 16

5.13 GPIO
Selected signals are output from GPIO pins of I/O connector. Following signals are selectable.
Output signal is 5V CMOS.
TIMER0 ACTIVE
USER OUTPUT
EXPOSURE ACTIVE
FRAME ACTIVE
FRAME TRANSFER
FRAME TRIGGER WAIT
Sensor Output
USB Streaming
TIMER0 ACTIVE
EXPOSURE
FRAME ACTIVE
FRAME TRIGGER
Copyright © 2018 TOSHIBA TELI CORPORATION, All Rights Reserved.
: This signal can be used as strobe control signal.
The delay time and pulse width of this signal are configurable.
: Level selectable user output by register setting.
: Period from exposure start to end.
: Period from exposure start to the CMOS transfer completion.
: Period of transferring image data on USB bus.
: Indicating waiting a Random Trigger Shutter.
An External trigger is input during this period,
exposure starts immediately.
EXT_TRIG
Exposure
VD
ACTIVE
FRAME
TRANSFER
WAIT
Delay Duration
15
* ActiveLow
D4278997A
http://www.toshiba-teli.co.jp/en/