Table of Contents
Advertisement
Always disconnect the spark plug when the machine is stored or if you want to perform
maintenance.
R
E/G
ECOIL POSITION AND
STARTING MOTION
The recoil is located in the left side of the handle(Figure 10)
To start the machine, pull the recoil according to Figure 10 shown.
A
DJUSTING THE HANDLEBAR
The handlebar is adjustable in free position to allow all operators to
use the machine.
To adjust the handlebar :
•
Unscrew the knob at the low side of the handlebar.
•
Pull of the axle with Jack bolt(A, Figure 11).
•
Adjust the handlebar as required
•
Put the axle, and screw the knob.
OREC SF600/600D
CAUTION
9
A
Figure 10
A
Figure 11
Advertisement
Table of Contents
