Breakdowns And Solutions - OREC SF600 Instruction Manual

Maintenance chart
Ask your dealer to realize this operation needing special tools and knowledge.
⊕ Inspection to realize by the owners before starting the engine
⊗ Inspection to realize by the owners after starting the engine
Part to inspect
Blade belt
Fuel
Flammable materials
Travel lever check machine do not move when lever is on "N"
Check travel lever goes on "N" when applying brake
Tires
Brake
Check travel lever goes on "N" when applying brake
Chassis
Safety stickers
Safety switches
Guards & shields Check they are bolted in their place and in good
Tank and fuel hoses
Throttle lever
tines Check they are bolted in their place and in good
Main clutch control lever
Blade belt
Engine
PROBLEME
Engine does not start
The machine does not travel
The machine does not stop
The rotor does not rotate
Cannot cultivate
OREC SF600/600D
Inspection
Check belt tension
Check wear
refueling
Fuel cock
Clean the machine from flammables materials
Check tires pressure
Check tires wear
Check efficiency of the brake
Check for rust, and cracks
Check they are in place and in good condition
Check for efficiency
condition
Check for leaks and good condition
Replace if needed
Check for efficiency
condition
Check the adjustment of the wire
Check they tensioned and in good condition
Refer to engine manual

BREAKDOWNS AND SOLUTIONS

CAUSE
No fuel
Battery is empty
Safety switches are working
V Belt damaged
V Belt slips
Travel lever is not on « N »
main clutch lever is not engage
Engine rotation is not good
Chain,Sprocket, Gear is damaged
Machine hops
Dashing of the machine
Cannot cultivate completely
Every use first 20
hours
⊕
⊕
⊕
⊗
⊗
⊕
⊕
⊗
⊗
⊕
⊗
⊕
⊕
⊗
⊕
⊕
Load or replace the battery
Check brakes, blade clutch and seat and travel lever
Move the travel lever to « N »
engage main clutch lever
Cannot use because of clay or ground is too hard. Turn the
soil by other machine in advance.
Easy Anchor is worn or dropped. Cultivate too deep
Change all tine for new one.
15
Every les Every 300 hours
100 hours every year
SOLUTIONS
Refuel the tank
Change the Belt
Adjust Belt tension
Adjust carburetor
Change damaged part
Easy Anchor is worn .