Introduction - OREC SF600 Instruction Manual

"Only the English version of this manual can be used as a reference."

INTRODUCTION

Forward to the user
Read this manual before any use of your rotor tiller only the herein instructions shall help you to achieve an efficient and
safe work.
A safe use will only result from the manner you will use the machine in accordance with the restrictions described in this
manual. Thus, you must know and follow all the safety measures in this manual and those relating to the use of your tiller.
The tiller that you have just bought has been designed and manufactured for your entire satisfaction. As any other
mechanical machine, it requires a proper maintenance and must be kept clean. Grease the machine like indicated. Follow
the rules and safety indications as described in this manual and as showed on the preventive instruction stickers.
About maintenance, always mind that your OREC dealer has the skills, the genuine parts and the necessary tools to solve
the possible problems.
Use only the OREC original parts : " non genuine " parts will not assure you of a correct and safe working and are likely to
make the guarantee null and void. Write the name and the serial number of your machine hereunder :
MODEL :.......................................................................................
SERIAL NUMBER (refer to the pictures herein) :.........................
Always mention these information to your dealer in order to obtain the right parts.
Concerned about constant progress, OREC keeps the right to modify the machines without being compelled to modify
those already sold.
The illustrations and characteristics in this manual might lightly differ from your machine because of the constant
improvements made by our production department.
In this manual, the left and the right hand or the rear and the front position are determined according to the user at the
handlebar.
All along this manual the word IMPORTANT is used to indicate that a fault might cause damage to the machine. The words
WARNING, CAUTION and DANGER are used with the " safety/warning " pictogram (triangle with an exclamation mark) in
order to indicate a hazard for your safety.
This symbol indicates that you must be very attentive because your safety is at stake. It reminds that you must follow the
safety instructions and pay attention to hazardous operations that might cause injuries.
WARNING
Reminds the safety rules that might cause injury if they are not respected
CAUTION
Remembers to pay attention to a real danger that is likely to cause injury or even death if no proper precaution is taken.
DANGER
Indicates a major hazard that is most likely to cause irremediable injury or death if the right precautions are not taken.
2
OREC SF600/600D