Installing Operating System - HIKVISION DS-9600NI-H8 Installation Manual

Installation Manual of DS-9600NI-H8
Steps:
1. Enter BIOS interface when starting process by pressing F2 on keyboard.
2. Enter Advance settings interface by pressing direction buttons and Enter button on keyboard.
Boot > Legacy > Normal Boot Menu > Advance
3. Set the CD/DVD-ROM Drive as the first boot type.

4.3 Installing Operating System

Before you start:

If you use a SATA CD/DVD-ROM drive, connect it to the interface of eSATA.

If you use a USB CD/DVD-ROM drive, connect it to any of the USB interfaces.

If you use a SATA disk as the system disk, connect it to the eighth HDD slot, which is located at low-right corner after
opening the front panel. The Windows 7 OS, Windows 8 OS and Linux OS can be installed on the NVR directly.
Step:
Insert the Windows installation CD and install the operating system.
Figure 4. 6 Boot Configuration Interface
Figure 4. 7 Setting the Boot Type
8