Table of Contents
Advertisement
Installation Manual of DS-9600NI-H8
Chapter 3
3.1 Front Panel Introduction
No.
Name
Status LED
1
Indicators
2
Backup Button
3
USB Ports
4
Power Button
5
Channel Status Indicators
6
Front Panel Lock
Interface Description
Figure 3. 1 View of Front Panel
Table 3. 1 Description of Front Panel
Power
Power indicator is red in standby status and green if the device is running.
Alarm
The indicator status is programmable via system SDK.
Tx/Rx blinks in red or green color when there is network data transmission.
Tx/Rx
HDD
HDD indicator blinks when hard disk writing or reading.
The indicator status is programmable via system SDK.
Ready
The indicator status is programmable via system SDK.
Archive
The button response is programmable via system SDK.
Universal Serial Bus (USB) 3.0 ports for additional devices such as USB mouse
and USB Hard Disk Drive (HDD).
Press the Power button for over 1.3 seconds to shut down the device, yet if you
press more than 4 seconds, the device will be shutdown forcedly.
The indicator status is programmable via system SDK. The indicator color can be
set as red or green color.
You can lock or unlock the panel by the key.
POWER ALARM Tx/Rx HDD READY ARCHIVE
Description
3
Advertisement
Table of Contents
