TMG -SP75 Product Manual page 7

3. Then install winch (32) to the L-bracket (12) with washer (16), bolt (18) and nut (17).
4. Attach the L-bracket (12) to the left frame (1) with washer (16),bolt (15) and nut (17).
5. Raise the joined press bed frame (2) to the desired height and insert the bed frame pins (3) into the holes
on the frames (1).
CAUTION: Press bed frame is heavy and could cause a potential hazard. Raise press bed
frame with 2 or more people.
W W W . T M G I N D U S T R I A L . C O M P 7 / 2 0 T o l l F r e e : 1 - 8 7 7 - 7 6 1 - 2 8 1 9