TMG -SP75 Product Manual page 14

To Replace Oil:
1.Position the pump in the vertical position and
fully retract the hydraulic ram.
2.Open release valve by turning handle
counter-clockwise.
3.Remove the oil plug.
4. Turn the pump on its side so that old oil
will drain from the oil fill hole.
W W W . T M G I N D U S T R I A L . C O M
5. Fill the oil case.
KEEP DIRT AND OTHER MATERIAL
CLEAR WHEN POURING.
6. Screw the oil plug.
7. Perform the Air Purge Procedure.
P 1 4 / 2 0 T o l l F r e e : 1 - 8 7 7 - 7 6 1 - 2 8 1 9