General Safety Rules; Important Safety Considerations - TMG -SP75 Product Manual

GENERAL SAFETY RULES

WARNING:
result in serious injury.
CAUTION:
this manual and have developed a thorough understanding of how the Shop Press works.
WARNING:
cannot cover all possible conditions or situations that could occur. It must be understood by the operator
that common sense and caution are factors which cannot be built into this product, but must be supplied by the
operator.

IMPORTANT SAFETY CONSIDERATIONS

SHOP PRESS USE AND CARE
Do not modify the Shop Press in any way. Unauthorized modification may impair the function and/or

safety and could affect the life of the equipment. There are specific applications for which the Shop Press
was designed.
Always check of damaged or worn out parts before using the Shop Press. Broken parts will affect the

Shop Press operation. Replace or repair damaged or worn parts immediately.
Store idle Shop Press. When Shop Press is not in use, secure it out of the reach of children. Inspect it for

good working condition prior to storage and before re-use.
Not for use by children or people with reduced mental capacity.

Do not use under the influence of drugs or alcohol.

Ensure children and other bystanders are kept at a safe distance when using press.

INSPECTION
Inspect the press carefully before each use. Ensure the press is not damaged, excessively worn, or missing

parts.
Do not use the press unless it is properly lubricated.

Using a press that is not in good clean working condition or properly lubricated may cause serious injury.

Inspect the work area before each use. Make sure it is free and clear of any potential hazards.

W W W . T M G I N D U S T R I A L . C O M
Read and understand all instructions. Failure to follow all instructions listed below may
Do not allow persons to operate or assemble this Shop Press until they have read
The warnings, cautions, and instructions discussed in this instruction manual
SAVE THESE INSTRUCTIONS
P 3 / 2 0 T o l l F r e e : 1 - 8 7 7 - 7 6 1 - 2 8 1 9