TMG -SP75 Product Manual page 11

5.Align ram and work piece to ensure center-loading. Do not overload work piece.
6.When work is completed, stop pumping the handle(or release the trigger).Slowly turn the release
Valve counter-clockwise in small increments until ram is free from work piece.
7.Once ram has fully retracted, remove workplace from bed frame.
Cautiously remove work piece from press.
W W W . T M G I N D U S T R I A L . C O M P 1 1 / 2 0 T o l l F r e e : 1 - 8 7 7 - 7 6 1 - 2 8 1 9