Printing Still Images - Canon MV MVX 200 Instruction Manual

Printing Still Images

You can print still images by connecting the camcorder to a printer with Direct Print
function. You can also use the print order settings for direct printing (
Following printers can be connected to your camcorder:
Canon Printers PictBridge compliant CP Printer
Bubble Jet Direct compatible Printer
PictBridge compliant Bubble Jet Printer
CP-10/CP-100 CP-Printer
PictBridge compliant non-Canon Printer
If your CP-300 is not PictBridge compliant (does not carry the PictBridge logo),
upgrade the printer firmware following the instructions on below website to
enable use with this camcorder.
http://www.canon.co.jp/Imaging/cp300/cp300_firmware-e.html
If you cannot access the website, please contact:
❍ For Europe: A local Canon distributor listed in the Canon European Warranty
System List included in the CP-300 kit.
❍ For other regions: Canon Customer Support Help Desk listed in the Canon
Customer Support Leaflet included in the CP-300 kit.
Connecting the Printer to the Camcorder
1. Turn off the camcorder and insert a memory card that contains still images.
2. Turn on the printer.
3. Set the camcorder to CARD PLAY mode.
128).
Printer with
direct print function
E
119