Recording From A Tape In The Camcorder; Recording From Other Video Devices - Canon MV MVX 200 Instruction Manual

Recording from a Tape in the Camcorder

CAMERA
1. Play back the tape.
2. Press the PHOTO button halfway when the scene you wish to record
appears.
• The camcorder pauses playback. The remaining image capacity and other information
appear.
• When you press the PHOTO button on the wireless controller, recording starts
immediately.
3. Press the PHOTO button fully.
• The card access indicator flashes.
• You can also record a still image by pressing the PHOTO button fully when the tape is
in playback pause mode.
You can record images from devices connected via the S-video terminal or AV terminal
(analog line-in function), or via the DV terminal as still images on a memory card.
For connecting instructions, refer to page 33 and 81.
CAMERA
1. Set the camcorder to PLAY (VCR) mode.
• If a cassette is loaded, make sure that the tape is stopped.
• When recording via the AV terminal, make sure that "AV\DV" is displayed on the
screen. When recording via the DV terminal, make sure that "AV\DV" is not
displayed. Change the setting as necessary (
2. Connected device: Load a recorded cassette and play back the tape.
3. Press the PHOTO button halfway when the scene you wish to record
appears.
• The still image, remaining image capacity and other information appear.
• When you press the PHOTO button on the wireless controller, recording starts
immediately.
4. Press the PHOTO button fully.
The card access indicator flashes.
98
PLAY (VCR)

Recording from Other Video Devices

PLAY (VCR)
CARD CAMERA
CARD CAMERA
87).
CARD PLAY
CARD PLAY