Using The Wireless Controller; Inserting Batteries - Canon MV MVX 200 Instruction Manual

Using the Wireless Controller

Point it at the camcorder's remote
sensor when you press the buttons.

Inserting Batteries

The wireless controller operates with two AA (R6) batteries.
1. Open the battery cover.
2. Insert the batteries following the +
and – markings.
Replace both batteries.
3. Close the battery cover.
❍ Camcorder and wireless controller are equipped with 2 remote sensor modes
(
wireless controller are set to the same mode.
❍ The wireless controller may not work properly when the remote sensor is
subjected to strong light sources or direct sunlight.
18
76). If the wireless controller does not work, check if camcorder and