Selecting The Drive Mode - Canon MV MVX 200 Instruction Manual

Selecting the Drive Mode

Continuous
Shooting
High-Speed
Continuous Shooting
AEB (Auto
Exposure Bracketing)
Single
Changing the Drive Mode
CAMERA
Press the DRIVE MODE button to switch between the drive modes.
The setting changes with each press of the button.
Continuous Shooting/High-Speed Continuous Shooting
CAMERA
Press and hold the PHOTO button.
A series of still images will be recorded as long as you hold the PHOTO button.
❍ Maximum number of continuous shots at one time:
Still Image Size
These figures are approximate and vary with the recording conditions and subjects.
Sufficient space on the memory card is required. Continuous shooting stops when card is full.
❍ The number of frames per second may be lower when
warning) is displayed on the screen.
104
Captures a quick series of still images while you press the
PHOTO button (3 frames/sec.).
Captures a quick series of still images while you press the
PHOTO button (5 images/sec.).
The camcorder records a still image in three different
exposures (dark, normal, light in 1/2 EV steps), allowing you to
choose the perfect exposed shot.
Records a single still image when you press the PHOTO button.
PLAY (VCR)
PLAY (VCR)
Normal speed
1280 × 960
640 × 480
CARD CAMERA
CARD CAMERA
Frames per Second
High speed
3 frames 5 frames
3 frames 5 frames
PHOTO button
DRIVE MODE button
CARD PLAY
CARD PLAY
Maximum Number
of Continuous Shots
10 images
60 images
(camcorder shake