Quick-Release Latch Rack Ear Assembly - HP ProLiant DL60 Gen9 Maintenance And Service Manual

Remove the thumbscrew rack ear assembly.
4.
To replace the component, reverse the removal procedure.

Quick-release latch rack ear assembly

WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the
internal system components to cool before touching them.
CAUTION: To prevent damage to electrical components, take the appropriate anti-static
precautions before beginning any installation, removal, or replacement procedure. Improper
grounding can cause electrostatic discharge.
To remove the component:
Power down the server (on page 27).
1.
Remove all power:
2.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Remove the server from the rack (on page 30).
3.
If installed, remove the security bezel
4.
("Remove the security bezel
Removal and replacement procedures 67
(optional)" on page 26).