HP ProLiant DL60 Gen9 Maintenance And Service Manual page 41

CAUTION: To prevent damage to electrical components, take the appropriate anti-static
precautions before beginning any installation, removal, or replacement procedure. Improper
grounding can cause electrostatic discharge.
To remove the component:
Power down the server (on page 27).
1.
Remove all power:
2.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Do one of the following:
3.
Extend the server from the rack (on page 27).
o
Remove the server from the rack (on page 30).
o
Remove the access panel
4.
CAUTION: When connecting or disconnecting the cache module cable, the connectors on
the cache module and cable are susceptible to damage. Avoid excessive force and use
caution to avoid damage to these connectors.
If removing a FBWC module from an expansion board in slot 2, remove the PCI riser assembly first
5.
before disconnecting the cache module cable.
For information on FBWC cabling, see "FBWC cabling (on page 98)".
Disconnect the cache module backup power cable from the cache module.
6.
("Access panel" on page 37).
Removal and replacement procedures 41