Marking A Still Image For Printing (Print Mark) - Canon MV MV4 Instruction Book

Marking a Still Image for Printing (Print Mark)

-MV4i MC only-
This section describes how to mark the still image for printing from Card
operation submenu in CARD PLAY mode (including the way to cancel the
setting).
– When displaying an index screen, you can mark the image for printing.
– When playing back a single image, you can erase all print marks.
You can also protect a still image through File Operation menu (
Marking an image for printing while viewing an index screen
CARD
PLAY
CARD OPER.
( 34)
Make sure a memory card that has images recorded on it has been inserted into
the camcorder.
1. With an image in the display, press the INDEX SCREEN button.
• Up to 6 images appear in the display.
• Move the
printing (Index Screen
2. Open the menu and select CARD OPER.
3. Select \ \ PRINT MARK
4. Press the SELECT dial in.
• The print mark appears next to the image.
• Press the SELECT dial again to cancel it.
5. Close the menu.
Notes:
• To cancel a print mark, move
SELECT dial in. The
• If there are a large number of images recorded on the memory card, it may take
time for a print mark to appear on an image.
mark to the image that you want to mark an image for
108).
.
to the print-marked image and press the
print mark disappears.
PRINT MARK
E
111).
113