Recording Still Images To A Memory Card - Canon MV MV4 Instruction Book

Recording Still Images to a Memory Card

-MV4i MC only-
2
Take still images to a memory card. You can also record onto a memory card
images from a tape in the camcorder, or images input through the DV in terminal.
• Moving pictures cannot be recorded onto a memory card.
• Images input through the A/V in terminal cannot be recorded onto a memory card.
• Memory cards cannot record audio.
• When you are using an SD Memory Card, make sure the protect switch is set to
allow recording.
Make sure a memory card that has enough memory available is inserted into the
camcorder.
CARD
R E C
1. Set the POWER dial lock lever to the
2. Press the button next to the POWER dial and hold, turn the
POWER dial to CARD REC.
• The number of images that can still be recorded on the memory card
appears in the display.
• The camera will turn itself off if you are using a battery and do not operate
the camera for more than about 5 minutes. Set the POWER dial to OFF and
then back to CARD REC.
3. Press the PHOTO button halfway and hold it.
• Exposure is locked.
• During autofocus F flashes white in the display as the camcorder adjust the
focus and it is displayed continuously as a green mark when the camera is
ready to take the still image.
4. Press the PHOTO button fully down to record the still picture.
• F disappears from the display. The shutter sound sounds and simultaneously
the display appears to close for an instant as if it were a shutter releasing.
• The image appears in the display and is recorded to the memory card.
• While the camera is recording the still image, RECORDING TO CARD
>>>>
flashes and
mirror mode and on the screen of a connected TV.)
1
appears red in the display. (It appears white when in
3
4
22
position.
E
103