Cardr E C - Canon MV MV4 Instruction Book

When Operating 2 Canon DV Camcorders (Remote Sensor Mode)
E
To prevent interference from other
Canon wireless controllers being used
nearby, there are 2 remote sensor
modes and an off setting. The wireless
controller and the camera have to be set
to the same mode in order to be
compatible.
The wireless controller and the camera have been preset to mode 1. If you change
the mode on the camera, be sure to change the mode on the wireless controller to
the same mode.
PLAY
MOVIE P.SCAN
( 34)
To turn the remote sensor off:
Open the menu and select SYSTEM. Then select WL.REMOTE, set it to
OFFB and close the menu.
• B appears in the display.
To change the mode...
...on the camera:
Open the menu and select SYSTEM. Then select WL.REMOTE, set it
to A 1 or A 2 and close the menu.
• The selected mode will appear on the display for 4 seconds.
...on the wireless controller:
Press and hold the REMOTE SET button on the wireless controller.
Simultaneously press the ZOOM W button for mode 1 or the ZOOM
T button for mode 2. Continue to press simultaneously for over 2
seconds.
• Be sure to set the wireless controller to the same mode as the camera.
44
( )
CARD CARD
VCR
R E C PLAY
SYSTEM
REMOTE
SET
WL.REMOTE••• 1
ZOOM
W T
A 1
: Mode 1
A 2
: Mode 2
OFFB : Sensor off