Describing The Energy Label And Saving Energy; Energy Labelling; Energy Efficiency - Kernau KFD 812 W User Manual

11. DESCRIBING THE ENERGY LABEL AND SAVING ENERGY

11.1. ENERGY LABELLING

11.2. ENERGY EFFICIENCY

• You should operate the dryer to full capacity, but make sure that it is not overloaded.
• When the laundry is being washed, the spin speed should be at the highest level possible. This will
shorten the drying time and reduce energy consumption.
• Make sure that the same kinds of laundry are dried together.
• Please follow the recommendations in the user manual for programme selection.
• For air circulation, leave an appropriate clearance on the front and back sides of the Dryer. Do not
cover the grills on the front side of the machine.
• Unless necessary, do not open the door of the machine when drying. If you have to open it, do not keep
it open for a long time.
• Do not add new (wet) laundry during the drying process.
• Hairs and lint that detach from the laundry and merge in the air are collected by the "Lint Filters".
Please make sure that the filters are cleaned before and after each use.
• For models with a condenser, make sure that the condenser is cleaned at least once a month or after
each 30 uses.
• During the drying process, the environment where the dryer is installed must be well ventilated.
1. Trademark
2. Model
3. Energy Class
B
4. Annual Power Consumption
5. Noise During Drying
6. Dry Laundry Capacity
7. Cotton Cupboard Dry Cycle Time
8. Condensing Effi ciency Class
9. Machine Technology
EN
62