IMPORTANT:
CLEAN THE METAL SURFACES OF THE SENSOR 4 TIMES A YEAR.
IMPORTANT:
Do not use metal tools to clean the metal surfaces of the sensor.
WARNING:
Due to the risk or fire and explosion, do not use solution agents, cleaning agents or similar products when
cleaning the sensors.
6.5. CLEANING THE INNER SURFACE OF THE
LOADING DOOR
IMPORTANT:
DO NOT FORGET TO CLEAN THE INNER SURFACE OF THE
LOADING DOOR AFTER EACH DRYING PROCESS.
Open the loading door of the dryer and clean all of the inner surfaces
and the gasket with a soft, damp cloth.
EN
57