Cleaning The Condenser; Cleaning The Humidity Sensor - Kernau KFD 812 W User Manual

6.3. CLEANING THE CONDENSER

IMPORTANT:
Clean the condenser when you see the warning "Condenser Cleaning".
IMPORTANT:
EVEN IF THE "CONDENSER CLEANING WARNING LED" IS NOT ON: CLEAN THE CONDENSER
AFTER EVERY 30 DRYING PROCESSES OR ONCE A MONTH.
If the drying process is completed, open the loading door and wait for it to cool down.
1. Open the plinth and release the 2 cover locks of the condenser.
2. Hold the condenser by the plastic part and pull it out.
3. Clean it with a showerhead and wait for the water to drain off.
4. Fully insert the condenser into its seat and lock the 2 locks.
5. Close the plinth cover

6.4. CLEANING THE HUMIDITY SENSOR

Inside the machine, there are humidity sensors that detect
whether the laundry is dry or not.
To clean the sensors:
1. Open the loading door of the machine.
2. If the machine is still hot due to the drying process, wait
for it to cool down.
3. Using a soft cloth soaked in vinegar, wipe the metal
surfaces of the sensor and dry them.
EN
56