Cleaning The Humidity Sensor; Cleaning The Inner Surface Of The Loading Door - Kernau KFD 9603 User Manual

WARNING: DO NOT CLEAN WITH BARE HANDS SINCE THE
EXCHANGER FINS ARE SHARP. THEY MAY HURT YOUR HANDS

5.4. Cleaning the Humidity Sensor

Inside the machine, there are humidity sensors that detect whether the laundry is dry or
not.
IMPORTANT: CLEAN THE METAL SURFACES OF THE SENSOR 4 TIMES
A YEAR.
IMPORTANT: Do not use metal tools to clean the metal surfaces of the sensor.
ATTENTION: Due to the risk or fire and explosion, do not use solution agents,
cleaning agents or similar products when cleaning the sensors.
5.5. Cleaning the Inner Surface of the Loading
Door
IMPORTANT:DO NOT FORGET TO CLEAN
THE INNER SURFACE OF THE LOADING DOOR
AFTER EACH DRYING PROCESS.
Open the loading door of the dryer and clean all of the
inner surfaces and the gasket with a soft, damp cloth.
To clean the sensors:
1. Open the loading door of the machine.
2. If the machine is still hot due to the drying
process, wait for it to cool down.
3. Using a soft cloth soaked in vinegar, wipe
the metal surfaces of the sensor and dry
them.
EN 62 39 61