Congratulations on your new AcuRite product. To ensure the best possible product performance, please read this manual in its entirety and retain it for future reference. Unpacking Instructions Remove the protective film that is applied to the LCD screen prior to using this product.
Features & Benefits 17 3 516 DISPLAY UNIT FRONT 1. Outdoor Sensor Signal Strength 11. Date 12. Intelli-Time Clock 2. Current Outdoor Temperature ® Arrow icon indicates the direction Automatically updates itself for Daylight Saving Time. temperature is trending. 3. High Records 13.
Page 4
Features & Benefits DISPLAY UNIT BACK 5. A-B-C Switch 1. Integrated Hang Hole ID code that must match sensor’s For easy wall mounting. A-B-C switch to ensure units 2. “ “ Button synchronize. For setup preferences and viewing records. 6. RESET Button Full reset to factory defaults.
SETUP Sensor Setup Set the A-B-C Switch conditions. Cold temperatures can cause alkaline batteries The A-B-C switch is located inside to function improperly. Use the battery compartment. It can lithium batteries in the sensor for be set to A, B or C. However, temperatures below -4ºF / -20ºC.
Display Unit Setup Set the A-B-C Switch Install or Replace Batteries Locate the A-B-C switch inside 1. Remove the battery the battery compartment. Set compartment cover. the A-B-C switch to A, B or C. 2. Insert 3 x AA alkaline You must select the same letter batteries into the battery choices for both the display unit...
Intelli-Time Clock ® Intelli-Time products are pre-programmed with the correct time and date. Intelli-Time technology instructs the time and date to set themselves. All you need to do is select your Time Zone and Daylight Saving Time preferences. The clock will then automatically set itself and change for Daylight Saving Time. Set the Time, Date &...
Placement for Maximum Accuracy AcuRite sensors are sensitive to surrounding environmental conditions. Proper placement of both the display unit and outdoor sensor are critical to the accuracy and performance of this product. Display Unit Placement Place the display unit in a dry area free of dirt and dust. Display unit stands upright for tabletop use or is wall-mountable.
OPERATION Using the Weather Station Learning Mode Self-Calibrating Forecasting uses a unique algorithm to analyze changes in pressure over a time period (called Learning Mode) to determine your altitude. After 14 days, the Learning Mode icon disappears from the display screen. At this point, the self-calibrated pressure is tuned in to your location and the unit is ready for superior weather prediction.
Troubleshooting Problem Possible Solution If the wireless signal indicator shows no bars: • Relocate the display unit and/or the outdoor sensor. The units must be within 330 ft (100 m) of each other. • Make sure both units are placed at least 3 feet No outdoor sensor (.9 m) away from electronics that may interfere with the wireless communication (such as TVs, microwaves,...
Page 11
Troubleshooting Problem Possible Solution • Check that the batteries are installed correctly. Batteries may need to be replaced. Display screen • Reset the display by pressing the reset button, located on not working the back of the display unit. Date and time will need to be entered after a reset.
Care & Maintenance Display Unit Care Clean with a soft, damp cloth. Do not use caustic cleaners or abrasives. Keep away from dust, dirt and moisture. Clean ventilation ports regularly with a gentle puff of air. Outdoor Sensor Care Clean with a soft damp cloth. Do not use caustic cleaners or abrasives. Calibration Calibrate Temperature &...
3. Press the “▲” or “▼” buttons to calibrate the pressure higher or lower. 4. Press the “Set” button to confirm the calibration adjustment. Note: The “ ” icon will remain illuminated next to the calibrated value. After 20 seconds of inactivity, the display will save your adjustments and exit calibration mode.
Specifications Outdoor: -40ºF to 158ºF; -40ºC to 70ºC TEMPERATURE RANGE Indoor: 32ºF to 122ºF; 0ºC to 50ºC Outdoor: 1% to 99% RH HUMIDITY RANGE Indoor: 1% to 99% RH 330 ft / 100 m WIRELESS RANGE depending on home construction materials 433 MHz OPERATING FREQUENCY Display: 3 x AA alkaline batteries...
Customer Support AcuRite customer support is committed to providing you with best-in- class service. For assistance, please have the model number of this product available and contact us in any of the following ways: (877) 221-1252 info@chaney-inst.com AcuRite 24/7 support at www. .com Installation Videos Register your Product...