Azbil CY8100C1000 Specifications & Instructions

Insertion Type CO
Part No. 83165722-002 (Assembly Kit)
General
Model CY8100C in combination with Part No. 83165722-002
is an insert type CO concentration transmitter used for
2
detecting concentration of carbon dioxide (CO
This product can be used in a wide range of applications
such as monitoring of CO
2
the control of outdoor air intake.
Features
•
Non-dispersive infrared absorption method (NDIR)
•
Linear output signal in 1-5 V DC range
•
Long-term stability
Model Number and Part Number
For the insertion type CO concentration transmitter, both of
2
the following items are required.
Model/Part number
CY8100C1000 Main unit
83165722-002 Assembly kit
- Sampling probe
- Gasket, 2 screws, 2 washers
- Cable assembly
Specifications
Item
Measuring range 0 to 2000 ppm CO
Operating principle Non-dispersive
method (NDIR)
± (50 ppm + 5 % of reading)
Measuring accuracy
Continuously ON: ±150 ppm/year
Drift
Continuously OFF (reference value):
±15 ppm/48 hours at 50 %RH
Time constant 15 min. or less (windless)
3 min. or less (0.6 m/s wind)
Environmental Operation CO
conditions Temperature: 0 to 50 °C
Humidity: 0 to 95 %RH (non-condensing)
Transport/ Temperature: -20 to 50 °C
Storage Humidity: 0 to 95 %RH (in moisture-
proof package)
24 V AC ± 10 %, 50 to 60 Hz
Power supply voltage
Power consumption Max. 3 VA
Output signal 1 to 5 V DC (linear with 0-2000 ppm
CO
Allowable load resistance 5 kΩ or more
Wiring Power supply: 2-wire
CO
2
Model CY8100C1000 (Main Unit)
) in ducts.
2
concentration in return ducts and
Description
Specification
Concentration
2
infrared absorption
concentration: 0 to 2000 ppm
2
concentration)
2
concentration output: 2-wire
2
Concentration Transmitter
Optional Parts
Part number
83165722-002
83104511-001
83104981-001
(1/2)
Item
Initial stabilizing time
Allowable vibration
Insulation resistance
Enclosure rating (main unit) IEC IP65 (dust-proof and water-proof)
Weight
Material
Application
1
Specifications/Instructions
Description
Assembly kit (for replacement)
- Sampling probe
- Gasket, 2 screws, 2 washers
- Cable assembly
Zero calibration service bag
(CO zero calibration gas generator)
2
Zero calibration service cylinder
(CO zero calibration gas cylinder)
2
Specification
Continuously OFF for 48 hours or longer:
Approx. 10 days (∗ Product in a
package is exceptional.)
Other than the above: Approx. 3 days
2
4.9 m/s (10 to 150 Hz)
100 MΩ or higher at 500 V DC
(between the case and each lead wire)
Approx. 350 g
Main unit
- Case: PC + ABS plastic
®
(Bayblend FR90)
®
- Cover: PC Makrolon 6555
Sampling probe: PC Makrolon
Indoor duct, chamber
AB-6256
(2/2)
®
6555