Table of Contents
Advertisement
Setting the power level/Switching off
vapour extraction
Touch the vapour extraction display.
To switch the fan on touch the
appropriate sensor for the power
level you want.
To switch the fan off touch the 0
sensor.
If the vapour extraction is not switched
off manually, it will switch itself off
automatically 12 hours after last being
used.
Deactivating Con@ctivity temporarily
The vapour extraction has switched on
automatically.
You can deactivate Con@ctivity in
various ways:
- Touch the sensor control
- Touch the 0 sensor control
- Select a different power level
Set the power level you want.
Depending on the programming,
Con@ctivity will be reactivated when
you switch the hob off and back on
again, see "Programming".
If you want to deactivate Con@ctivity
permanently, you will need to change
the Con@ctivity programming, see
"Programming".
Booster
The maximum duration for the Booster
is 10 minutes.
To switch it off early, set a different
power level.
Run-on time
It is advisable to run the fan for a few
minutes after cooking has finished. This
helps to neutralise any lingering
vapours and odours in the air. The
following two options are available:
(5 minutes) and (15 minutes).
The run-on duration will be carried out
using the power level set during
activation. You can change the power
level during the run-on period.
Touch the or sensor to activate
the run-on period.
Touch the , or 0 sensor to
deactivate the run-on period.
If you switch the hob off with the
sensor, the run-on period will continue
through to the end.
Operation
43
Hide quick links:
Advertisement
Table of Contents
