Starting The Programme; Adding Laundry; Cancelling The Programme; Resuming The Programme When The Programme Status Is Rinse Hold - Siemens WM14XEH5GB User Manual And Installation Instructions

en Basic operation
Pull out the detergent drawer.
1.
Pour in detergent.
2.
→ "Detergent drawer", Page 20
If required, add the care product.
3.
Push in the detergent drawer.
4.
13.7 Starting the programme
Note: If you want to change the time
until the programme ends, set the
"Ready in" time first.
Press Start/Reload.
▶
a The drum rotates and load detec-
tion takes place. This can take up
to 2 minutes, after which water
enters the drum.
a The display shows either the pro-
gramme duration or the "Ready in"
time.
13.8 Adding laundry
Note: Please read the information in
the Safety → Page 4 and Preventing
material damage → Page 10 sections
to ensure that you use the appliance
safely.
Press Start/Reload.
1.
The appliance is paused and
checks whether it is possible to
add or remove laundry.
Add or remove laundry.
2.
Close the door.
3.
Press Start/Reload.
4.
13.9 Cancelling the pro-
gramme
Once the programme has started,
you can cancel it at any time.
Note: Please read the information in
the Safety → Page 4 and Preventing
material damage → Page 10 sections
to ensure that you use the appliance
safely.
Press Start/Reload.
1.
50
Open the door.
2.
The appliance door remains
locked for safety reasons if the
temperature and water levels are
high.
– If the temperature is high, start
the Rinse/Freshen Up pro-
gramme.
– If the water level is high: Start
the Spin or Drain programme.
Remove the laundry.
3.
13.10 Resuming the pro-
gramme when the pro-
gramme status is Rinse
Hold
Set the Spin or Drain programme.
1.
Press Start/Reload.
2.
13.11 Unloading the laundry
Note: Please read the information in
the Safety → Page 4 and Preventing
material damage → Page 10 sections
to ensure that you use the appliance
safely.
Open the door.
1.
Remove the laundry.
2.