Connecting The Appliance - Siemens WM14XEH5GB User Manual And Installation Instructions

en Installation and connection
Unscrew and remove the screws in
1.
the vertical transport struts using a
T20 screwdriver.
Remove the transport struts.
2.
Undo and remove the screws in
3.
the horizontal transport strut using
a T20 screwdriver.
16
Remove the transport strut.
4.
4.6 Connecting the appliance
Connecting the water inlet hose
Note: Please read the information in
the Safety → Page 4 and Preventing
material damage → Page 10 sections
to ensure that you use the appliance
safely.
WARNING
Risk of electric shock!
The appliance contains live parts.
Touching live parts is dangerous.
Do not immerse the electrical
▶
AquaStop valve in water.
Connect the water inlet hose to a
1.
tap (26.4 mm = 3/4").
Open the water tap carefully and
2.
check that the connection points
are tight.
¾˝
min.
10 mm
min.
17 mm