Download Print this page
Mayr ROBA-stop-S Installation And Operating Instructions Manual

Mayr ROBA-stop-S Installation And Operating Instructions Manual

Hide thumbs Also See for ROBA-stop-S:

Advertisement

Quick Links

Installation and Operating Instructions
for ROBA-stop
Please read and observe this Operating Instruction carefully!
A possible malfunction or failure of the clutch and damage may be caused by not observing it.
Table of contents:
Page 1: - Table of contents
Page 2: - Safety regulations
Page 3: - Safety regulations
Page 4: - Brake views
Page 5: - Design
Page 6: - Air gap inspection
Page 7: - Electrical connection
Page 8: - Adjustment of the braking torque
Page 9: - Anti condensation heating (option)
Manufacturer declaration
The product is to be seen as an option or component for installation into machines or equipment according to the machinery directive
98/37 EC. The machinery (product) must not be put into service until the machinery into which it is to be incorporated has been declared
in conformity with the provisions of the applicable EC-directives.
The product corresponds to the low voltage directives 73/23/EEC.
The observance of the relevant EMC-directive 89/336/EEC is to be guaranteed.
25/10/2005 K/TK/BG/KR
Page 1 of 9
®
-S Size11
- Manufacturer's declaration
- Parts list
- Safety and information signs
- Function
- Supply condition
- Assembly conditions
- Brake attachment
- Tacho-attachment (option)
- Air gap adjustment
- Exchange of the rotor
- Release monitoring
- Emergency release
- Condensation water
- Disposal
- Breakdowns
Chr. Mayr GmbH + Co. KG
Eichenstraße 1
87665 Mauerstetten
Germany
(B.8.3.1.GB)
Tel.: 08341 / 804-241
Fax: 08341 / 804-422
http://www.mayr.de
eMail:
info@mayr.de

Advertisement

loading
Need help?

Need help?

Do you have a question about the ROBA-stop-S and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Mayr ROBA-stop-S

  • Page 1 EC-directives. The product corresponds to the low voltage directives 73/23/EEC. The observance of the relevant EMC-directive 89/336/EEC is to be guaranteed. 25/10/2005 K/TK/BG/KR Chr. Mayr GmbH + Co. KG Tel.: 08341 / 804-241 Eichenstraße 1 Fax: 08341 / 804-422 87665 Mauerstetten http://www.mayr.de...
  • Page 2: Safety Regulations

    The use beyond of the corresponding technical indications is for a max. operating temperature of +155 ° C. considered as incorrect. 25/10/2005 K/TK/BG/KR Chr. Mayr GmbH + Co. KG Tel.: 08341 / 804-241 Eichenstraße 1 Fax: 08341 / 804-422 87665 Mauerstetten http://www.mayr.de...
  • Page 3 Measures against freezing from armature disc and rotor with The warranty conditions correspond to the sales and supply high humidity and deep temperatures. conditions of Chr. Mayr GmbH + Co. KG. Defects are to be advised immediately after detection to ®...
  • Page 4: Parts List

    Thrust spring external pole O-Ring Flange plate (option / Type dependent) Heating (option) Cap screw Type tag 25/10/2005 K/TK/BG/KR Chr. Mayr GmbH + Co. KG Tel.: 08341 / 804-241 Eichenstraße 1 Fax: 08341 / 804-422 87665 Mauerstetten http://www.mayr.de Page 4 of 9...
  • Page 5 (4) on the hub impairing the brake function (recommended hub – shaft fit H7/k6). Rotor and braking surfaces must be free of oil and grease. 25/10/2005 K/TK/BG/KR Chr. Mayr GmbH + Co. KG Tel.: 08341 / 804-241 Eichenstraße 1 Fax: 08341 / 804-422 87665 Mauerstetten http://www.mayr.de...
  • Page 6 9. Check the air gap according to "air gap inspection". removing the brake plate. A movement of the load must be avoided. 25/10/2005 K/TK/BG/KR Chr. Mayr GmbH + Co. KG Tel.: 08341 / 804-241 Eichenstraße 1 Fax: 08341 / 804-422 87665 Mauerstetten http://www.mayr.de...
  • Page 7 DC side switching. 0,75 mm - 0,4 mm = 0,35 mm (0,5 for not switching, 0,6 for switching). 25/10/2005 K/TK/BG/KR Chr. Mayr GmbH + Co. KG Tel.: 08341 / 804-241 Eichenstraße 1 Fax: 08341 / 804-422 87665 Mauerstetten http://www.mayr.de...
  • Page 8 (revertive torque max. 10 Nm). 11. Screw in screw plugs (10) incl. copper seal rings (11) again. Fig. 12 25/10/2005 K/TK/BG/KR Chr. Mayr GmbH + Co. KG Tel.: 08341 / 804-241 Eichenstraße 1 Fax: 08341 / 804-422 87665 Mauerstetten http://www.mayr.de...
  • Page 9 Switching position not correct Newly adjust switch monitoring not provided Micro switch defective Replace switch 25/10/2005 K/TK/BG/KR Chr. Mayr GmbH + Co. KG Tel.: 08341 / 804-241 Eichenstraße 1 Fax: 08341 / 804-422 87665 Mauerstetten http://www.mayr.de Page 9 of 9...