Eaton CROUSE-HINDS Series Instruction Manual page 7

INM F809F-Plus (DTM) Rev 1.8
You may find the following blocks under the root node:
•
Resource block (only accessible in the Configure/Setup tab)
This block allows access to the F809F device block mode (Auto/OOS), as well
as product-specific information (e.g. F809F device revision identifiers).
• System Transducer Block (System TB)
This block provides access to:
• the redundant power feed;
• which segments are monitored;
• whether alarms are latched and need acknowledgement;
• several 'wizards' (see section 5.4.3).
• Segment transducer blocks for segments 1...8
This block contains segment-related data such as segment voltage and
noise levels.
• Devices on the respective segment
The individual devices will show signal amplitude and retransmissions.
Click on the respective item in the tree view to access data in the application area
relevant to the selected item.
3