Arctic King MPPH-08CRN1-BI01 Operator's Manual page 22

REMOTE CONTROL INSTRUCTIONS
Automatic operation
AUTO
CLOCK SET TEMP.
FAN SPEED
1
2
When you set the air conditioner in AUTO
mode, it will automatically select cooling,
or fan only operation depending on what
temperature you have selected and the
room temperature.
Once you select the operating mode, the
operating conditions are saved in the
unit's microcomputer memory.
Thereafter, the air conditioner will start
operating under the same conditions
when you simply push the ON/OFF
button of the remote controller .
3
Start
Check that the unit is plugged in and power
is available. The OPERATION indicator
on the display panel of the indoor unit
starts flashing.
1. Mode select button (MODE)
Press to select AUTO.
2. TEMP/TIME button
Set the desired temperature. Normally,
set it between 21 C/
3. ON/OFF button
When the remote controller is off,
push this button to start the air
conditioner.
Stop
ON/OFF button
Push this button again to stop the air
conditioner.
If the AUTO mode is uncomfortable, you
can select the desired conditions manually.
When you select the AUTO mode, you do
not have to set the fan speed. The fan
speed will be automatically controlled.
2 1
。 。
70 F O to 2 8 C/83 F.