Related Manuals for Zippity LIBERTY LATTICE AC SCREEN KIT
Summary of Contents for Zippity LIBERTY LATTICE AC SCREEN KIT
- Page 1 ASSEMBLY INSTRUCTIONS LIBERTY LATTICE AC SCREEN KIT 45 MIN approximate assembly time for 3 panels 6935 Reames Rd. Ste. K. Charlotte, NC 28216 support@zippity-outdoor.com 704-892-5222 / 877-234-6196 zippity-outdoor.com www.zippity-outdoor.com...
-
Page 2: General Information
Although great care has been taken to ensure proper packaging and handling of this product, occasionally problems occur. If you discover any missing, damaged or defective parts, please contact our customer service department. EMAIL: support@zippity-outdoor.com PHONE: 704-892-5222 / 877-234-6196 Customer service agents are available to take calls weekdays from 8am-5pm EST. - Page 3 STEP 1: LAY OUT MATERIALS LIBERTY LATTICE AC SCREEN KIT 3 PANEL End Caps (12) Post Caps (6) (6 are installed, Horizontal Bottom Rail - Side (2) 6 are loose) ¾” Self-Augering 1 ½” x 1 ½” x 36” Stainless Steel Screw (24)
- Page 4 2. Starting at one end of the opposite post, other as shown. guide the pickets into the routed holes in the post. NOTE: Identify the top of the screen by nding the side of the post with pre-drilled hole 2 ¾" from the end of the post. www.zippity-outdoor.com...
- Page 5 3. Drive a ¾” screw (J) in each of the pre-drilled holes on the front and back of the rail (4 total). Align STEP 3.2 Insert the eight vertical pickets (I) into the routed picket holes in the rail. NOTE: Vertical pickets will have a sticker labeled "2". www.zippity-outdoor.com...
- Page 6 3. Drive (4) ¾” screws into the aligned pre-drilled holes. Align Repeat Steps 2-4 to create the other two screen panels. The other two panels will use side horizontal rails that STEP 4.2 have extra holes at the ends. Front panel has no extra pre-drilled holes www.zippity-outdoor.com...
- Page 7 3. Repeat this process on the other side with the third screen as shown below. NOTE: Ensure the screws are driven in straight. Front Panel STEP 6: INSERT THE POST CAPS STEP 6.1 Insert (6) post caps (A) over the top of the posts to complete the screen. www.zippity-outdoor.com...
- Page 8 - Useful for holding small trays, plants, etc. - Protects your condenser from winter elements. These products can be found at www.zippity-outdoor.com. Follow the instructions included with the optional accessory kits to assemble and install. 6935 Reames Rd. Ste. K. Charlotte, NC 28216 support@zippity-outdoor.com...