Table of Contents
Advertisement
6 Clean the pre-
filter
Note
•
The pre-filter is washable.
•
Clean the pre-filter when the replacement light (滤网1)
flashes to ensure optimal functioning of the appliance.
1
Switch off the purifier and unplug it.
2
Place your fingers in the recess of the
side panels and gently pull the top part of
the front panel towards you. Then lift the
hooks at the bottom of the panel out of
the top of the purifier.
3
To remove the pre-filter, grab the two
projections and pull the filter towards you.
EN
10
4
Pull the activated carbon filter out of the
pre-filter.
5
Wash the pre-filter under a running tap. If
the pre-filter is very dirty, use a soft brush
to brush away the dust.
6
Air dry the pre-filter.
7
Place the activated carbon filter into the
pre-filter.
8
Put the pre-filter back into the purifier.
Attach all hooks properly to the purifier.
Advertisement
Table of Contents
