Philips AC4005 User Manual page 5

Table of Contents

Advertisement

Caution
This appliance is not a
substitute for proper
ventilation, regular vacuum
cleaning, or use of an extractor
hood or fan while cooking.
If the power socket used
to power the appliance has
poor connections, the plug
of the appliance becomes
hot. Make sure that you plug
the appliance into a properly
connected power socket.
Always place and use the
appliance on a dry, stable, level,
and horizontal surface.
Leave at least 20cm free space
behind and on both sides of
the appliance and leave at least
30cm free space above the
appliance.
Do not place anything on top
of the appliance and do not sit
on the appliance.
Do not place the appliance
directly below an air
conditioner to prevent
condensation from dripping
onto the appliance.
Make sure all filters are
properly installed before you
switch on the appliance.
Only use the original Philips
filters specially intended for
this appliance. Do not use any
other filters.
Avoid knocking against the
appliance (the air inlet and
outlet in particular) with hard
objects.
Caution
Always lift or move the
appliance by the handle at the
back of the appliance.
Do not insert your fingers or
objects into the air outlet.
Do not use this appliance when
you have used indoor smoke-
type insect repellents or in
places with oily residues, burning
incense, or chemical fumes.
Do not use the appliance near
gas appliances, heating devices
or fireplaces.
Always unplug the appliance
after use and before you clean it.
Do not use the appliance in a
room with major temperature
changes, as this may cause
condensation inside the
appliance.
To prevent interference, place
the appliance at least 2m away
from electrical appliances
that use airborne radio waves
such as TVs, radios, and radio-
controlled clocks.
The appliance is only intended
for household use under
normal operating conditions.
Do not use the appliance
in wet surroundings or in
surroundings with high ambient
temperatures, such as the
bathroom, toilet, or kitchen.
The appliance does not
remove carbon monoxide
(CO) or radon (Rn). It cannot
be used a a safety device
in case of accidents with
combustion processes and
hazardous chemicals.
EN
3

Advertisement

Table of Contents
loading

Table of Contents