Recording From Digital Video Devices (Dv Dubbing) - Canon ELURA 80 Instruction Manual

Recording from Digital Video Devices
(DV Dubbing)
You can record from other digital video devices equipped with a DV terminal with virtually
no loss in picture and sound quality.
CAMERA
1. Connect the camcorder to the digital video device.
See Connecting a Digital Video Device (
2. Set the camcorder to PLAY (VCR) mode and load a blank cassette.
Make sure that [AV
3. Connected device: Load the recorded cassette.
4. Press the REC PAUSE button.
In record pause mode and during recording, you can check the
picture on the screen.
5. Connected Device: Play back the tape.
6. Press the
record appears.
Recording starts.
7. Press the
• Press the
• Press the
8. Connected Device: Stop playback.
Blank sections may be recorded as anomalous picture.
If the picture does not appear, reconnect the DV cable or turn the camcorder off
and back on again.
You can only record signals from devices with the
system in SP or LP format. (note that signals from identically shaped terminals
may be of different format
We recommend powering the camcorder from a household power source.
Copyright Signal
Certain software tapes are copyright protected. If you attempt to play back such tape,
"COPYRIGHT PROTECTED PLAYBACK IS RESTRICTED" appears and you will not be
able to view the contents of the tape. If you attempt to record from such tape via the DV
terminal, "COPYRIGHT PROTECTED DUBBING RESTRICTED" appears and you will
not be able to record the contents of the tape.
82
PLAY (VCR)
DV] is set to [OFF] (
/ button when the scene you wish to
button to stop recording.
/ button to pause recording.
/ button again to restart recording.
CARD CAMERA
79).
84).
148).
CARD PLAY
logo recording in SD