Playing Back On A Tv Screen; Tvs With Audio/Video Terminals - Canon ELURA 80 Instruction Manual

Playing Back on a TV Screen

The AV terminal also serves as headphones terminal. When " " is displayed on the
screen, change the setting following the procedure below.
CAMERA
MENU
VCR SETUP
( 38)
Open the menu and select [VCR SETUP]. Select [AV/PHONES
[AV] and close the menu.

TVs with Audio/Video Terminals

Refer also to the TV or VCR instruction manual.
1. Turn off all devices before starting the connections.
2. Connect the STV-250N Stereo Video Cable to the camcorder's AV
terminal and the audio/video terminals on the TV/VCR.
Connect the white plug to the white audio terminal L (left), the red plug to the red audio
terminal R (right) and the yellow plug to the yellow video terminal VIDEO.
3. If connecting to a TV, set the input selector to VIDEO. If connecting to
a VCR, set the input selector to LINE.
We recommend powering the camcorder from a household power source.
TVs with Video ID-1 system: Recordings made in the widescreen mode will be
automatically played back in widescreen mode.
36
PLAY (VCR)
Signal flow
STV-250N Stereo Video Cable
(supplied)
CARD CAMERA
AV/PHONES ••AV
CARD PLAY
], set it to
VIDEO
AUDIO
L
R