Selecting The Drive Mode - Canon ELURA 80 Instruction Manual

Selecting the Drive Mode

Continuous
Shooting
High-Speed
Continuous Shooting
AEB (Auto
Exposure Bracketing)
Single
Changing the Drive Mode
CAMERA
1. Set the program selector to
2. Press the DRIVE MODE button to switch between the drive modes.
The setting changes with each press of the button.
Continuous Shooting/High-Speed Continuous Shooting
CAMERA
Press and hold the PHOTO button.
A series of still images will be recorded as long as you hold the PHOTO button.
Maximum number of continuous shots at one time:
Still Image Size
1280 x 960
These figures are approximate and vary with the recording conditions and subjects.
Sufficient space on the memory card is required. Continuous shooting stops when
card is full.
The number of frames per second will be lower when "
warning) is displayed on the screen.
In normal and high-speed continuous shooting mode, images are captured at 2
frames/second when using the flash.
104
Captures a quick series of still images while you press the PHOTO button.
For the number of frames per second, refer to the following table.
The camcorder records a still image in three different exposures (dark,
normal, light in 1/2 EV steps), allowing you to choose the perfect exposed
shot.
Records a single still image when you press the PHOTO button.
DRIVE MODE button
PLAY (VCR)
PLAY (VCR)
Normal speed
3 frames
640 x 480 3 frames
CARD CAMERA
.
CARD CAMERA
Frames per Second
High speed
5 frames
5 frames
PHOTO button
Program selector
CARD PLAY
CARD PLAY
Maximum Number
of Continuous Shots
10 images
60 images
" (camcorder shake