Monitor Controls - Back Panel - Lorex L14S244C Instruction Manual

1. Power - This button controls power to the entire unit . Depress the side with the '•', to turn power
ON. Depress the other side to turn the unit OFF. When the monitor is On, it is defaulted to
Channel 1.
2. VCR Audio /Video In - Use with A/V cables (not supplied) to receive audio and video from an
external source (VCR).
3. VCR Audio/Video Out - Use with A/V cables (not supplied) to transmit audio and video monitor
to VCR.
4. Slave Audio/Video Out - Use with A/V cables (not supplied) for use with a slave monitor.
5. 6 Pin Din Camera Inputs - Channel 1-4 Camera inputs (for cameras with 6 Pin Din camera
inputs).
6. BNC Camera Inputs - Channel 1-4 camera inputs (for cameras with BNC Video outputs).
7. RCA Audio inputs - Channel 1-4 Audio inputs (for cameras with RCA Audio output).
8. Alarm Function Terminals - These terminals are used to connect external alarm devices such
as a motion sensor, door/alarm sensor, or time lapse VCR. Refer to Alarm Connection in the
appendices for further details.
***IMPORTANT NOTE: WHEN RECORDING USING A TIME LAPSE VCR***
Actual recording – Records what appears on the Monitor.
-9-