Displaying The Data Code - Canon Elura 100 Instruction Manual

Displaying the Data Code

The camcorder maintains a data code containing the recording date and time. When you
play back a tape, you can display the data code and select the data code combination you
wish to display.
Available in the
FUNC. button
WIDE SCR button
MENU
( 64)
1. Open the FUNC. menu, select (
2. Select (
select (
3. Select a setting option and press (
the menu.
4.
Pressing the WIDE SCR button again makes the data code disappear.
The data code will not display the next time you turn on the camcorder.
72
and
Joystick
DISPLAY SETUP/
) the [DISPLAY SETUP/
) the [DATA CODE] option and press (
mode: Play back a tape and press the WIDE SCR button.
mode: Select the still image and press the WIDE SCR button.
modes.
DATA CODE DATE & TIME
) the icon and press (
] menu and press (
) to save the changes, then close
).
). Then,
).